USB 3.1 Type C To 2 x DisplayPort MST Hub Adapter
This Type C adapter allows you to connect two DisplayPort monitors to a single USB 3.1 or Thunderbolt 3 Type C port. The graphic card settings can be configured according to your need; the same video output can be output on both displays (mirror mode), different video outputs can be used on both displays (extended mode) and a single video output can be shown across both displays (expanded mode). The available resolutions will depend upon the selected refresh rate, graphics card used and the selected mode configuration, using both displays simultaneously the maximum resolution is 3840 x 2160p 30Hz / 2560 x 1600 60Hz whilst 3840 x 2160p 60Hz is possible when only a single monitor is used.
- Connect 2 DisplayPort monitors to a USB 3.1 or Thunderbolt 3 Type C Port
- Open applications on separate displays or expanded across multiple monitors
- MST Hub compatible with AMD Eyefinity, NVIDIA Surround and Intel Collage
- DP1.2a and HBR2 compatible, supports resolutions up to Ultra HD 4K
No external power supply is needed, the adapter is powered by the Type C port.
Please Note: A Type C port with support for DisplayPort Alternate Mode is required. Available resolutions are dependent upon the configuration and type of the connected graphics card.
Manual de Instruções (PDF)
Technical informattion : - Compatible with all USB Type C/Thunderbolt 3 equipped computers with DisplayPort Alternate Mode
- Input: USB 3.1 Type C male
- Outputs: 2x DisplayPort female
- Length: 15cm
- DisplayPort 1.2a with MST and HBR2 support
- AMD Eyefinity, NVIDIA Surround and Intel Collage compatible
- HDMI/DVI/VGA displays can be connected by use of adapters
- Max. resolutions:
- 4K 3840 x 2160@60Hz single monitor
- 4K 3840 x 2160@30Hz or 2560 x 1600@60Hz for 2 DP monitors simultaneously
- Supports up to 48bit colour depth (RGB/YCC 4:4:4)
- Supports audio over DisplayPort: 192 kHz 16-24bit/sample, up to 7.1 Channel
- HDCP 1.3 compliant
- Chipset: STDP4320
- USB Bus powered
- Supported OS: Windows 8/8.1/10 & Mac OS 10.10 and higher
|